Ci printing machine generally uses an eccentric sleeve structure, which uses the method of changing the position of the printing plate to make the printing plate cylinder separate or press together with the anilox roller and the impression cylinder at the same time. there is no need to repeatedly adjust the pressure after each clutch pressure of the plate cylinder.

Pneumatically controlled clutch press is the most common type of clutch press in web flexo presses. The cylinder and the clutch pressing shaft are connected by connecting rods, and a plane is partially ironed on the arc surface of the clutch pressing shaft, and the height difference between the plane and the arc surface enables the plate cylinder supporting slider to slide up and down. When the compressed air enters the cylinder and pushes out the piston rod, it drives the clutch pressing shaft to rotate, the arc of the shaft faces downwards, and presses the supporting slider of the printing plate cylinder, so that the printing plate cylinder is in the pressing position; when the compressed air reverses direction , When entering the cylinder and retracting the piston rod, it drives the clutch pressure shaft to rotate, the iron plane on the shaft is downward, and the support slider of the printing plate cylinder slides upward under the action of another spring cylinder, so that the printing plate cylinder is in the release pressure Location.